Check this on your router to see if it works fine

0
62

To have a good Internet connection, the router is undoubtedly a key piece. You must make sure at all times that it works correctly and does not have any problems. Now, how can you check it? In this article we tell you some simple steps that you can take. The objective is to detect any minimal problem and be able to take measures to improve the connection and not have problems when browsing or connecting devices.

What to do to verify that the router works well

Keep in mind that you should not only look at speed, although it is an important factor; there are other aspects such as latency, signal quality or coverage that you must also take into account. All this you will be able to see easily and you will only have to carry out a few quick steps.

Do a cable and Wi-Fi test

The first thing is to test the connection both by Wi-Fi and by cable. To determine if the router works correctly, it is essential to see that it does so both wirelessly and when we connect it by Ethernet cable. In both cases it should provide a fast and stable connection.

Therefore, looking at the Internet speed for both cable and Wi-Fi is a first step. But you should also look at the ping or latency, because if it is too high, you will have problems playing online, making a video call and other daily tasks that you can perform on the Internet.

Move away from the router and measure the signal

Another step you can take to check if the router is working well is to move a bit away from it and measure the signal. With this you will be able to know if the Wi-Fi is working correctly or, on the contrary, if there is any problem that could affect the wireless signal, for example if the antennas are not working properly or any similar problem.

How can you look at the signal strength? The best thing is that you execute a very simple command in Windows: netsh wlan show interfaces. There you will see information related to the network to which you are connected and one of the data is the signal. It is measured as a percentage from 0 to 100. The closer it is to 100, the stronger the signal will be. If you notice that when you move away from the router the signal plummets, there may be something wrong.

Improve Wi-Fi signal

Test for small cuts

This is also important for troubleshooting the router. The most common is that you can detect network outages simply through use. For example, if you see that the connection is cut constantly when you are browsing, either from your computer or from your mobile. That can tell you there is something wrong.

But you can also use a command to detect if there are small outages in the network. To do this you have to go back to the Command Prompt in Windows and execute the following command: ping – t 8.8.8.8. This time you have to leave it running for a while and then stop it. When you stop it you will see the number of packets lost. If it is 0, there is no problem. In case you have lost packages it means that there are small cuts.

Connect all devices and check operation

Today it is normal for us to have a large number of devices connected to the router. That can cause it to start to malfunction. How can we know if the device works correctly? You can connect all the equipment and see if the connection works fine, is cut off or any type of error appears.

If you connect many devices, basically all the ones you usually have in your day to day, and you do not notice any problems, it means that the router works well. If you detect that there is something wrong, you should take action.

As you can see, you can take into account these recommendations that we have given to detect problems with the router. It is important to always see that the router works well and take action in case there is something wrong and you see that it is not working as it should.

Previous articleThis is the reason why the price of diesel will rise from February 5
Next articleMovistar, Orange or Vodafone: Who offers cheaper fiber and mobile after the price increase?

LEAVE A REPLY

Please enter your comment!
Please enter your name here