Android mobile devices over time have managed to have a large number of changes both in their operating system and in their physical appearance, in order to integrate new components into the device’s hardware that were capable of improving its operation and performance.
These changes have been really noticeable, especially in mobile devices of the renowned Samsung brand, in the newer models we can find very important changes such as the fact that they have eliminated the physical start button, or that the devices no longer have a removable cover, because the phone’s battery is now integrated into it.
Previously, the battery could be easily removed, since it was only enough to remove the back cover of the mobile device and we would have access to the device’s battery as well as to the SD memory card and Sim card slot, which will no longer be possible. in Android devices that are manufactured with the battery integrated into it.
However, this update has its advantages since having an integrated battery makes our mobile device automatically a phone capable of resisting splashes of water, although it will be difficult on occasions when we need to have access to the battery, especially when we want to replace it with a battery. a new one because the device begins to have problems with the battery charge when connected to a power.
What you should know before removing the cover of your mobile device
First of all, you must carry out the process very carefully, if you do not do it this way, you could damage your cell phone. You should also have the right (precision) tools, avoid unsuitable knives and screwdrivers.
You will lose the warranty, so only do this in an emergency and always after the warranty expires. In fact, it is best to avoid removing the cover of your mobile and always go to the technical service if applicable.
Things you will need to remove the cover of your Samsung
Clearly everything varies depending on the mobile, but precision screwdrivers and tweezers are generally required. Certainly it is best to buy a mobile repair kit that usually includes everything you need.
What is the procedure to remove a battery from a Samsung mobile?
Knowing how to disassemble the back cover of Samsung Android devices is something that can be very useful at some point, in case your phone is discharging faster than usual and you need to check the battery or replace it, you will have to disassemble the cover on the back of the phone first.
For this you will have to use a special tool kit for phones, since if we use instruments that are not we can damage the device itself, or mistakenly move a component that is part of its hardware, normally a basic kit with tools to mobile phones does not cost more than 5$ dollars so it can be really affordable for you.
To start disassembling the back cover of your Samsung device you will have to follow a series of steps that we will show you below:
Remove the cover of your Samsung device
- The first thing to do is turn off the device to avoid a short or electrocution when trying to remove the back cover.
- Then you will have to unmount the SD and Sim card from the device so that they are not damaged because we will have to apply heat
- Next, what you will do is apply heat to the entire back of the phone, you can do it with the help of a hair dryer or with a heat gun (spread the heat throughout the back cover without leaving it in a specific point where this could weaken the adhesive that holds the cover to the phone)
- After that, try to insert a thin object around the edges of the back cover so that you can gradually remove the cover (this object should not be metal as it could scratch the cover of the device)
- When you have been able to take off the back cover of the device, slowly remove it from the phone
-
And ready! You will already have the back cover of your Samsung phone disassembled so that you can check the battery or some other component that is in this area.
Can a cell phone with an internal battery be opened?
Yes, you can open a cell phone with an internal battery, but it is important that it is done very carefully. Even so, it is undeniable that it is more difficult than with mobile phones with an external battery.
How to disassemble the integrated battery in my Samsung device?
If the battery of your device already requires a change, make sure you buy an original battery or one that has the same capacities from the same brand, to avoid having errors in the device, below we will show you how to disassemble the integrated battery in your device:
The first thing you should do is remove the back cover of the device with the steps previously given, in order to have access to the battery, once that is done, carefully remove the battery from the phone and place the new battery with which you are going to replace it, To finish you will have to heat the glue found on the cover of the cell phone.
You can apply heat with the same hair dryer, then fit the cover to the phone and apply a little pressure by placing rubber bands on it, and wait for it to finish sticking to use it.
Care you should have with the cover of your cell phone
The important thing is not to exert too much force, if you do you could break the cover or some electronic component of the device. In turn, if you have the possibility to take a photo after opening the mobile, you would have a guide if you do not remember where a screw or component goes.