The SSID is a very significant value because it identifies your Wi-Fi network with respect to the others. All Linksys routers set a default SSID and this is essential to protect the network. For this reason, we recommend you read this article with which you will learn How to disable or hide the SSID on a Linksys router – Step by step
What the SSID?
SSID stands for “Service Set Identifier” and consists of a primary name assigned to a wireless network (WiFi). This identifier consists of a maximum of 32 alphanumeric characters and frequently refers to the name of the network.
What is the SSID for?
The SSID or “Service Set Identifier” is used to identify all the packets of the network to which a router is connected. In this way, we can differentiate this network from the other wireless networks that are in the area. For this reason, it is convenient to configure and improve the connection security of a WiFi router to be able to enjoy this resource.
How to disable or hide the SSID on a Linksys router – Step by step
It is imperative to disable or hide the SSID on a Linksys router to protect a wireless network. Likewise, it is advisable to hide the signal of the WiFi network so that the Internet is not stolen. If you want to perform this procedure, pay attention to each of the steps that we explain below.
Access the Linksys router settings
If you want to disable the SSID on a Linksys router you must enter the settings of this device. To achieve this, access the web browser of your choice and type in the address bar: “192.168.1.1”. Press the “Enter” key to bring up the Linksys interface.
Initially, a login is required. If this is your first time accessing the router’s settings, type “admin” (without the quotes) for the username and password. It is recommended that you go to the “Administration” tab to set a new password to protect your network.
Set up the connection
To configure the connection, go to “Setup” and “Basic Setup”. Next, check that the second parameter has the value PPPoe. Press the “Save settings” button if you make any changes to the username and password associated with the Internet service.
Set up the wireless network
If you want to disable or hide the SSID of your Linksys router, you must have previously identified your network. If you haven’t done so already, go to the “Wireless” tab and click on “Basic Wireless Settings”. Check the “Manual” option and type a name for the Wi-Fi network in the “Network Name (SSID)” field. Lastly, press the “Save Settings” button.
Disable or hide the SSID on the Linksys router
If your wireless network has an SSID or “network name” and you can access the Linksys router settings and enter the “Wireless” or “Wireless” tab. There, you will be able to manage basic wireless settings. Therefore, you can easily change the name and password of your WiFi network.
Subsequently, locate the “SSID Broadcast” or “SSID Transmission” option and check the “Disabled” or “Deactivated” option. In this way, you can disable or hide the name that identifies your Wi-Fi network. Finally, click on “Save Settings” or “Save Settings”.
What is the use of disabling or hiding the SSID on a Linksys router?
The procedure to disable or hide the SSID on a Linksys router serves to protect your wireless or “Wifi” network by preventing other users from detecting its name when viewing all available Wi-Fi networks.
Therefore, most intruders will not be able to access your network so easily. However, this alternative is not totally effective in defending your wireless network since there are some methods that allow you to find out the SSID despite having configured it as a hidden or disabled parameter.
