Windows is a great system, so much so that it allows you to share a file to a network resource (another computer, a cell phone, etc). But, since not everything is gold, sometimes when doing that you can find several errors that prevent you from continuing, these can be like the Windows error code 0x80070057, or more common: the error 0x80070035 “the network path was not found on Windows”.
This failure can occur for many reasons, for example: Wrong writing the network route to which you are going to connect, having the clocks at the wrong time, among others. Regardless of what your problem is today you will see the best solutions.
Fix Error 0x80070035 Network Path Not Found in Windows
You have to keep in mind that there are several solutions to the problem posed, so I will break them down so that you understand better. The first is to check the sharing settings, to achieve this you must go to the unit you want to access and right click on it, so a drop-down will appear where you must select “Properties”.
From there go to “Share”, if the network path is not shared, then there is an error, so you must press the “Advance sharing” button, this will take you to another section, where you must enable the “ Share this folder” and also write the name of the unit (C, D), when you finish click “Apply” and then “OK”.
Finally, press the Windows + R key combination to get the run box, in it write the name of the folder and hit enter, if everything went well, you should be able to access and the problem will be solved.
Check device manager
If you still have not been able to fix the ‘error 0x80070035 the network path was not found in Windows’ then it is time for you to apply another solution, the next one is to check the device manager.
If you want to achieve it, you must go to the Windows start button and right-click on it, in the list that will appear, select “Device Manager”, then choose the “View” option found in the menu bar of the console.
This action will allow you to choose the “Show hidden devices” section, there you will find at least 6 network adapters, delete all of them except the one that best suits the device in question, then restart the PC. With that there should be no error.
Add IPv4 protocol over TCP/IP
Another method that also works as a solution for the error is to add the IPv4 protocol, to achieve this, you must press the Windows + R keys, that will bring up the run box, in it type ncpa.cpl and hit enter.
That will show you your connection, when you see it, right click on it and choose “Properties”, in this other section you must enable the box called “Internet Protocol (TCP/IP) version 4″, then click on the ” Install”.
Then, press the option called “Protocol” and press “Add”, that in turn will open another tab where you must choose “Reliable multicast protocol” and click “Accept”, with that the problem should be solved and not return happen.
And that’s it, with the last thing you read you should be able to fix the error, so the question How to fix the error 0x80070035 the network path was not found in Windows?, is already solved.
Remember that there are other ways to intervene this problem, so if none of the above works for you (which they should), you just have to find another one and apply it. In case other errors such as error 0x80040154 in Windows 10 occur, they will have different solutions as well.
