Air conditioning is one of the devices that can have a higher energy consumption. Although we can use it both in summer and winter, it is in the warmer months when we use it the most. This means that it is convenient to use it as little as possible, whenever we can, so as not to spend excessively. Therefore, in this article we will tell you some tips that you can put into practice in order to reduce the use of air conditioning at home.
Keep in mind that not all air conditioners will consume the same. That is to say, a very old one is not the same as a much more efficient, more current one. Nor is it the same to have it at 19 degrees than to put it at 25 in summer. There are factors that will also influence energy consumption.
How to avoid using so much air
The idea is to put the air conditioning on when it is really necessary. If we prevent the house from overheating, we will have less need to put it. We are going to manage to keep the temperature cooler and that means that we will save on the electricity bill, by not having to turn on a device like this.
Ventilate at a good time
The first thing you should do is ventilate the house at a good time. Do not do it when the outside temperature rises, as that will make your home heat up more and you will have to pull the air conditioning later to cool it down. It is important to ventilate the house, but doing it at the right time is key.
You can do it first thing in the morning, when the temperature is cooler. This will not only help keep the heat out, but you can even cool the house if the outside temperature is low. You can save a few hours without having to put on the air conditioning and you can save electricity.
Use good insulation
But beyond ventilating the house, air could also enter even if you don’t want to. This is what happens with possible slots in windows and doors. This can cause the interior temperature to rise and you have to use the air conditioning for longer or more power to cool the environment.
The ideal is to use good thermal insulation. Check the windows and check that you don’t have any gaps through which air can enter. Close the doors correctly, also between rooms where there may be a significant thermal difference.
Keep out direct sunlight
In this case, what you should do is prevent direct sunlight from entering. If you have a window through which the sun’s rays enter during very hot hours, it is best that this does not happen. You can lower the blind or use awnings. In this way, you will be able to maintain the internal temperature as well as possible.
Small changes can make consumption go down a lot. Check all your windows very well and check what you can do so that sunlight does not enter that can increase the temperature of the house.
Beware of heat exchange
This can happen, for example, between the kitchen and the rest of the house. If you are making food, the kitchen will have a higher temperature. You are using electrical appliances, you are heating food, etc. The best thing in these cases is that this heat does not go to another room next door.
Once again, isolation is essential. You can open the kitchen windows and doors to the street or patio, but avoid heat exchange with the rest of the house. With this, you will achieve that other rooms stay a little cooler and you will have to use less air conditioning.
As you can see, with these adjustments and tips that we have given you can make the temperature in your home cooler and you will avoid using the air conditioning so much. The goal is to save on your electricity bill and pay less each month during the summer.
