Having a good Internet connection may be necessary for many everyday tasks. For example, you need good speed to use the cloud, watch streaming content in high quality, etc. Now, sometimes you really don’t need to have a lot of contracted speed. It may be the case that you are not really taking advantage of what you have contracted, either because you do not need it or because you have some problems or limitations.
What does it mean to not take full advantage of the contracted rate? For example, if the connection that reaches a device is not good, when downloading a file you will have limitations. You could not achieve maximum speed, which would be what you have contracted and what you pay for, so it is worth seeing what is happening.
Why is the connection not being used?
This can happen whether you have a maximum Internet rate, such as 1 Gbps symmetrical, or if you have a much lower one, such as 100 Mbps. In any case, you could always be limited and not properly take advantage of that Internet connection that you have. you have contracted for your home.
You have coverage problems
Something quite common that could happen to you is that you have problems with coverage. Maybe you are not taking advantage of the connection, because you connect too far from the router or the signal is weak. You may have continuous outages or simply that the speed that reaches your device does not correspond to what it should.
What can you do to avoid this problem and be able to make better use of the connection? For example, you could choose to move the router to another location. This will help the signal reach your devices better. You should also check for possible interference, objects that block the connection or even choose to buy repeaters and other devices.
Devices misconfigured
Another reason for wasting the connection you have contracted is having the devices configured incorrectly. For example, you could be connecting to the 2.4 GHz frequency, when you should use the 5 GHz frequency, or vice versa. You could also have outdated card drivers or a configuration problem in the system.
The ideal is that you always have everything up to date, correctly configure the connection and the operating system you use. It is something that you should apply regardless of whether you connect through a computer or do so through a mobile device.
You use less than contracted
It may happen that you simply do not need to have the rate you have contracted. You could use it much less than what was contracted. For example, if you only need to have Internet for social networks, email or browsing in general, you do not need, by any means, to have the highest rate available.
It is interesting that you analyze what use you are going to give to the connection and see what rate interests you the most. Based on this, you will be able to choose the one that best suits you and not be paying more than you should.
Router in poor condition
Do you have the router in good condition? It is a key piece for you to connect to the Internet. If you have a problem, you could be wasting the rate you have contracted. Maybe it has a hardware failure, it overheats because it is not located correctly or it is not configured correctly and that causes problems.
You should always check that your router is working perfectly. This will help you avoid problems, since the connection could even be blocked or you may notice that the speed decreases a lot. It doesn’t matter if you have a top-quality router or a more limited one, since in any case there could be problems.
In short, as you can see, you may be wasting the Internet rate that you have contracted. It is key to detect errors, as well as try to improve the connection. You can measure the stability of the connection or do a speed test to see if everything is going well.
