It is one of the most important factors to save energy in summer. Keep in mind that each degree of difference can mean an expense or saving of approximately 7%. It is essential not to make mistakes. We are going to explain to you at what temperature you should set the air conditioning to be able to be comfortable in summer, but at the same time not be spending too much on the electricity bill.
The idea is that you can apply this during the day, when you are doing any activity at home, but also at night, when you want to maintain a good temperature for sleeping. You will see that there are differences and you will be able to save a little more money if you configure it correctly.
Air temperature in summer to save
The first thing you should know is that you should not set the air temperature to too low. It’s not good for health, but it’s not good for saving money either. Therefore, forget to set it to 19 or 20 degrees. Avoid that impulse to come in from the street, when it’s 40 degrees outside, and turn it to minimum so that it cools down as soon as possible; The only thing you are going to achieve is spend a lot more.
In order to save energy, the ideal is to set the air conditioning above 24-25 degrees. It will depend on your comfort level, but estimate that figure approximately. If you can set it to 25 (or even 26) better. The compressor will have to work at less performance, it will consume less and you will still be comfortable. Those 24-25 degrees would be the perfect temperature to put the air in during the day. You don’t need to set it lower and if you set it higher you could get hot. On the other hand, at night you will always be able to raise the temperature by one degree. If during the day you set it to 24, you could choose to set it to 25. If you set it to 25, then at night to 26. With that, it will be enough to sleep comfortably and not get hot.
There are smart devices that will allow us to turn the AC on and off from our smartphone, a really good alternative is the tadoº air conditioning remote control, which will allow us to control everything from our mobile phone, whether we are at home or away, so that it starts to cool the house before our arrival and thus have maximum comfort. This device will connect to the home Wi-Fi of the 2.4GHz band, and we can integrate it into home automation with Amazon Alexa, Google Assistant and also into Apple HomeKIT.
We use this tadoº device in our home automation with Home Assistant, with Apple HomeKIT integration instead of the official one through the cloud, because it usually fails to turn on the AC if we haven’t used it for a long time, since It goes to sleep and is not able to turn it on properly. Once you have integrated it into Home Assistant, you can make very advanced automations to save as much as possible.
Use air well
Regardless of the temperature at which you set your air conditioning, it is also essential to use it well. We are going to give you some recommendations so that you can save even more energy and be able to maintain the desired temperature more easily. One of those tips is to have good thermal insulation. Be careful not to have windows or doors open. It is also essential to know how to use the different modes that the air conditioning may have. It could have Eco mode or night mode, for example. By using them, you could save energy without letting the house gain temperature and not being comfortable in the hottest months, in summer. In addition, the “night” mode generally makes much less noise, perfect for sleeping without any problem.
Of course, it is advisable that you carry out a review of the device. Make sure that the filters are clean, that the grilles are not clogged and that the outside is not damaged or has collected dirt. All this will influence optimal functioning and you want to have it in perfect condition to be able to make the most of it. If we have not used the AC during the winter (because it does not have a heat pump, or because we simply have not used it), then you should do a thorough check of the filters and make sure that they are perfectly clean.
In short, adjusting the air conditioning temperature correctly is important. In summer, the ideal is that you have it at 24 or 25 degrees. At night, you could turn it up a notch and there wouldn’t be a problem. This will help you save on your electricity bill.
