The need to be connected has increased exponentially in recent years, making cell phones essential devices for the functioning of the world. It is as if a mobile phone were one more part of our body, since the human being has known how to give the correct use to this technology, in order to turn it into another tool for the functioning of his day to day.
In the same way, there are a lot of accessories that are capable of greatly expanding the uses that we can give to our equipment, be it mobile phones, tablets, etc. We can complement them with speakers, HD headphones, tracking devices, etc. Thus getting the most out of our teams.
Nowadays, we can even make use of all the functions of our mobile, directly on our wrist, in the best style of the eighties spies, all thanks to the famous SmartWatch. These devices allow you to use elements such as the music player, photos, calls, contacts, etc. No need to access our mobile. They are highly used by drivers, athletes, businessmen, etc.
These devices, like basically any other electronic equipment, can present all kinds of failures, from software failures, to battery failures and at startup, today we will focus on knowing why our SmartWatch can fail. when turning it on.
How to turn on your Smartwatch step by step
Turning on your SmartWatch t500 is very simple, since it has an integrated power/lock button, with which you can turn on or restart your device simply by pressing and holding the button and that’s it, it will turn on immediately, unless there is something wrong with it. button problem. Another way to turn on your SmartWatch is by connecting your charger, this, having fully charged, will turn on automatically.
What to do if the screen of my T500 smart watch does not turn on?
As we mentioned before, these devices, like any electronic equipment, are quite prone to failures of all kinds in their system, it is not something usual, but it can happen, it can happen.
There are different ways to deal with these situations if it is the case and it happens to you. Software errors, hardware errors, etc. They are all treatable, but it is important that you take into account the extent to which you can intervene yourself if you do not know enough about electronics, so that you can go to a professional.
Check the Hardware
An essential step when verifying the operation of our SmartWatch is to check the Hardware, looking for anomalies, such as screen failures, damaged lock button, etc.
If you know something about electronics and you think you are capable, you can even open your device to check everything from inside the watch, but this only if you have the necessary knowledge, since otherwise, you could even worsen the problem. In the case of checking the hardware for this device to turn on, you will have to pay special attention to 2 elements, the lock button and the charging pin.
Turn it on while connected
A fairly common way to verify the boot operation of our SmartWatch is by turning on the device while it is connected to the charger. In general, if it is a battery failure, this method will allow us to turn it on in order to verify, since when turning on any device, it generates a battery drain at startup, which sometimes is missing and that is why it is necessary to turn on the device together with the charger.
Change power outlet
If your SmartWatch is connected to a charger, and it is connected to an outlet, but it seems to be useless because it cannot hold a charge, certain things are likely to happen. First of all, it is possible that your charging pin is damaged, likewise, there is a possibility that the cable is also damaged. Finally, if you see that the situation does not improve, you can also try changing the T500 charger.
Ways to turn off your T500 quickly
Just as there are different ways to turn on a SmartWatch t500, there are also different ways to turn them off quickly, here we will show you how to do it in detail.
Swipe left on the screen
The SmartWatch can be turned off by holding down the lock button for a few seconds, followed by sliding our finger to the left of the screen, and that’s it, the device will turn off.
Go to ‘Settings’ and press ‘Turn off’
To turn off your SmartWatch t500, you will have to press the crown that is located on the right side of the device, once you have done so, the main menu will be displayed, in it, you will press the icon with 4 circular parts.
Following that, a list of options will appear on the screen, you will have to press the first one, which will say ‘About’. Automatically after that, the power off button will appear, you will press it and the Smartwatch will turn off automatically.
Where can I find the manual for my Smartwatch?
We will be able to access the t500 user manual in 2 ways, the main one is by obtaining it physically, since it comes in the device box, so therefore, by having the equipment, you will also have the manual.
Another way to obtain the user manual is through the web, since there are different sites on the internet where you can access this information, even entering platforms such as YouTube.
At what maximum distance from my phone does my Smartwatch work?
This will depend a lot on the device and the environment, most, if not all SmartWatches work via Bluetooth, thus allowing the device to have a range of at least 10 meters. But as we mentioned, that will depend entirely on the model, since an Apple Watch could work even at about 15 meters.
The fact of the terrain also influences a lot, since if there is interference or obstacles between your SmartWatch and your mobile, this could cause it to have even a little less range.
SmartWatches were designed to facilitate access to your information in circumstances in which you could not normally use your phone, we recommend that you make correct use of this equipment.
