It’s a fact that you don’t always have a good Wi-Fi connection at home. You might have trouble connecting wirelessly to devices, such as a computer or mobile phone, under certain circumstances. A common case is when there are dead zones. We’re going to tell you about the main ones and also give you some recommendations so that you can connect normally.
If you do a speed test with a device next to the router, you will normally get the maximum speed, unless there is a problem. However, the further away you go, the worse the results are. Also, when you get to certain areas of the house, you may notice that it gets even worse. These are called dead zones.
Common dead zones at home
Fortunately, you can always try to improve the connection through repeaters, Mesh systems or PLC devices. However, it is important to identify where these dead zones are. Otherwise, the problem would continue and you would not be able to have a quality connection.
Next to large walls
The first dead zone, a classic one, is being next to large walls or thick walls. This can affect many places, so you have to be careful. Logically, the thicker the wall, the more problems you will have. A concrete or stone wall is not the same as a very thin wall.
In these cases, it may be a good idea to create a wired installation. You could connect your devices with less coverage problems. Using PLC devices can also be useful.
Next to metal objects
Metal is one of those materials that can negatively affect your Wi-Fi connection. If you have metal objects near where you are going to connect, it can cause the wireless signal to be weaker, cut out a lot, and cause you to lose speed. You could even end up with no connection and not be able to connect at all.
The best thing you can do is try to keep metal objects as far away as possible. Try to keep the devices in areas where there are no materials that could negatively affect them.
Near other appliances
Yes, other electronic devices can affect your Wi-Fi connection. For example, you may have devices that use Bluetooth. This will cause interference. The same goes for devices like a microwave or a cordless phone. Since they operate on the 2.4 GHz frequency, problems arise.
Again, it’s best to stay away from any sources that could affect your connection. Be careful about the location of your router, as well as any devices you’re connecting to your wireless network.
Sites too far from the router
Of course, another reason for dead zones is that you are simply too far away from your router. The signal can only reach a certain distance. The farther away you are, the weaker the connection will be, and therefore the more problems you will have connecting your devices to the Internet.
To overcome this problem, you can use different options. You can bring Internet to other rooms thanks to PLC devices, but also use Mesh systems or repeaters.
These are therefore the areas of your home where you may have the most problems connecting to the Internet wirelessly. We recommend that you avoid making mistakes when placing your devices and always try to maintain their proper functioning.
