If you want to know if your Internet connection works correctly, you can take into account some aspects that we are going to mention. The objective is to detect any problem that there may be and determine if everything works correctly or, on the contrary, there is an error that you must solve. It is something that you can do at any time, regardless of what connection you have contracted.
Steps to check the Internet connection
Sometimes we have problems with the connection and we don’t know the reason. We don’t really know if it works well or if they are just occasional cuts due to some mistake we make. For this reason, it is important to verify some points and thus clear up doubts to see if it is a problem with a device or the connection.
Upload and download speed
The first thing you can do is an Internet speed test. In this way you can measure if what you receive from upload and download is correct or if it arrives less than what you have contracted. In case the speed is not correct, you should analyze what the problem could be and find a solution as soon as possible.
But to do the speed test, the ideal thing is that you do it by cable. In this way you will avoid possible interference or being too far from the router and that this slows down the connection. Therefore, connect the computer via a Gigabit Ethernet cable and perform a speed test.
Ping or latency
But it is not only important to look at the download and upload speed, but you should also check how the ping or latency is. It is essential that it be as low as possible, otherwise there would be a delay in the connection when using certain services and that would cause problems.
An example of why ping or latency is important is when we play online or make a video call. If it is too high, we may have problems starting a game or video calls will be delayed.
Try both bands
Another point to test if the Internet connection is correct is to see if the two bands work well. Current devices allow you to connect to the network through the 2.4 GHz and 5 GHz bands. It is important that both work well, since otherwise we could have problems taking advantage of all the available resources.
Therefore, connect your computer or mobile to each of these bands and check that they work well. You can also do a speed test in case you want to verify that the signal arrives correctly.
Move away from the router to test Wi-Fi
If you want to test Wi-Fi capability, beyond doing a speed test you should also move away from the router. The goal here is to see if the wireless connection works well when we move away from the access point. In case you detect problems, it would mean that something is wrong with the router, the antenna or the network card. You can always check that the Wi-Fi adapter is working fine.
The idea is that you gradually move away from the router and check the connection. At some point logically it will start to get worse, but the key is to check when that moment is and see if everything is going well.
enter the router
One last check that you can perform is to access the router. You can see, for example, the exact speed that arrives, without having to go to an external test. You can also just see that the configuration is correct, with the correct network name and passwords.
To enter the router you will have to know the gateway and the access data. If you have never changed them, our advice is to use a different key than the one that comes from the factory with the device. In this way you will avoid possible intruders and improve security.
