Getting a good Wi-Fi connection is not always possible. Sometimes the signal is weak, problems appear to achieve good speed, stability and, ultimately, the devices do not connect correctly. Why is this happening? Although there are different reasons, something that you should be very clear about is locating the router very well. We are going to show you some objects that you should not have around.
Yes, putting certain things near the router can cause wireless network failures. You may notice that the signal arrives worse, that there are continuous cuts or loss of speed. The same thing can happen if you place those same objects very close to any Wi-Fi receiver, such as a repeater, a computer, etc.
Things you should keep away from the router
These things that we are going to show should be kept as far away from your router as possible. Never put them right next to each other, as that will make it work worse. You may not notice anything drastic, such as a complete blockage of the wireless network, but you may notice that the signal is more unstable.
Mirror
Something you shouldn’t have near the router is a mirror. They are widely used decoration elements, but they can be a major problem when we talk about wireless networks. It is best to avoid having it close, as it will cause the signal to bounce more. This will cause the signal to not go as you would like and you will have problems.
There are certain materials and objects that are especially negative for wireless networks. This is a clear example. Be careful not to place decorative mirrors right next to the router or place this device where there is already a mirror placed.
Metal sheet
There should also not be a metal sheet, metal furniture, or other metal objects. It is a material that will cause the wireless signal to be blocked and not pass through correctly. Once again, be careful with the decorations that you are going to put around the router, as you may notice that the signal begins to lose strength.
Therefore, think twice if you have or are going to put something metal near the router. The same in case you have a repeater, Mesh system or any other device that is going to connect to the wireless network.
Water
Yes, water is not a good friend of Wi-Fi either. Anything that contains liquid will cause the wireless signal to weaken or be blocked completely. For example, do not put a fish tank with water right next to the router, nor certain appliances that may contain water, such as a refrigerator, washing machine, etc.
Also be careful with pipes, radiators and the like. Even if you think it will not have an excessive impact, it is a component that can cause major problems when you are going to connect to the network wirelessly.
Bluetooth devices
In this case, the problem comes from interference. Bluetooth devices, such as headphones, speakers, controls or any other type, work through the 2.4 GHz frequency. This will cause the Wi-Fi to have interference and not work as it should. You could have problems if you put these devices next to the router.
The same will happen if you have a cordless phone or a microwave. They are also going to use the 2.4 GHz frequency and that is what causes problems. Be careful with this and check very carefully what you are going to place near the device.
Something that generates heat
Here we can name many things. Basically, it is not a good idea for the router to overheat. Do not place any device that gives off heat nearby, such as television, video player, etc. Try to keep any heat source as far away as possible.
You must also remember that it is not good to put the router near a window where direct sunlight enters. That is a mistake, since this will make it get hotter and work worse. It could even shorten its lifespan substantially.
As you can see, there are certain devices and objects that you should move as far away as possible from the router. Avoid putting these things near your device, as you may have trouble getting the Wi-Fi network to work properly. The ideal is to have the router in a good place, from where it distributes the signal correctly.
