Having a good Wi-Fi connection is essential for everyday use when using devices at home. Although you can connect devices by cable, the truth is that most of us use them wirelessly, such as home automation devices. We are going to give you some tips that you should take into account to improve the network at the software level. It’s not just the hardware you use that matters.
Although you can focus on things like placing the router in a good place, having better wireless repeaters or buying a more powerful network card, if all this is not also accompanied by software improvements, you would not be able to have a truly powerful connection.
Optimize Wi-Fi also through software
The goal is for you to achieve a more stable wireless Internet connection, with fewer problems with signal loss or speed. Sometimes just making small changes can make a big improvement. We are going to talk to you about it, so that you can take it into account on any device you use.
Have everything updated
Something essential is to have everything well updated. You must apply it to the router, where you should have the latest version of the firmware available, but also to the network card drivers. This will help you have greater protection, since it can correct vulnerabilities, but also achieve an improvement in performance.
This is a simple change, at the software level, that you should always make. Make sure to apply it to any repeaters you have, Mesh system or any other device connected to the router. It will help you get a better connection.
Configure the router correctly
You should also have the router properly configured. This is key to achieving proper operation. For example, you should take advantage of the dual band, to connect to 2.4 GHz and 5 GHz, depending on what interests you most in each case. We can say that the first option is ideal when you connect from further away, even if the speed decreases.
Also, using the correct Wi-Fi channel is going to be important. This serves to avoid saturation and ensure that the signal reaches the devices you connect to the network better.
Beware of programs that affect Wi-Fi
Another factor to take into account is to be careful with possible programs that may affect the wireless network. You could have an antivirus that, by mistake, limits the connection or some software that generates conflicts with the network card drivers. Any program you install could cause a problem if it doesn’t work well.
To reduce the risk of these problems, we recommend that you only install software from official sources. It is also important that you be careful with possible additional plugins, which could affect the connection.
If you use VPN, make it a good one
If you use a VPN, make sure it is a good one. Otherwise, if you have a program that does not work well, that is not reliable, it could limit your wireless connection quite a bit and not reach an adequate speed. Check very carefully which one you install and configure it correctly.
It is true that a VPN will always make the connection a little worse. You may notice that the speed is slower, for example. However, the difference can be important if you compare a good, reliable application with one that is not.
In short, at the software level you can also make your Wi-Fi work better and not have problems. Always make sure you have everything well configured and don’t make the mistake of only thinking at the hardware level.
